For a home office computer and router, my best overall pick is the CyberPower CP1500PFCLCD, thanks to its 1500VA capacity and pure sine wave output for compatible computer power supplies. The APC BX1500M is another strong high-capacity choice, while the APC BE600M1 suits a smaller setup focused on a router and essential devices. The main tradeoff is between capacity and features on one hand, and a smaller footprint and simpler operation on the other. A UPS can give you time to save work and keep internet equipment powered, but actual runtime depends on the connected load and battery condition. Read on for the full comparison and guidance on choosing the right capacity for your office.
Get privacy and security gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Key Takeaways
- The CyberPower CP1500PFCLCD leads for demanding computer setups: its 1500VA capacity and pure sine wave output set it apart from simpler standby models.
- The APC BX1500M and CyberPower CP1500AVRLCD3 provide 1500VA/900W capacity: they are better suited to higher loads than the compact 600VA and 650VA options in this roundup.
- Small UPS units can suit routers and modest desk setups: models such as the APC BE600M1 and CyberPower ST425 prioritize straightforward backup over high output capacity.
- Capacity labels do not promise a fixed runtime: the computer, monitor, router, and other connected devices all draw from the same battery reserve.
- Battery chemistry and outlet layout affect ownership: the GOLDENMATE 1000VA lithium model differs from the lead-acid-heavy lineup, while each buyer should check which outlets provide battery backup.
| CyberPower CST135UC2-R Line-Interactive UPS Battery Backup | ![]() | Best for USB-C Charging and Outlet Flexibility | Capacity: 1350VA/810W | Output waveform: Simulated sine wave | Outlets: 10 total: 5 battery backup and surge-protected, 5 surge-only | VIEW ON AMAZON | See Our Full Breakdown |
| CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup and Surge Protector | ![]() | Best Overall for Active-PFC Home Office Computers | Capacity: 1500VA/1000W | Topology: Line interactive | Outlets: 12 total: 6 battery backup and surge-protected, 6 surge-protected | VIEW ON AMAZON | See Our Full Breakdown |
| APC Back-UPS BE600M1R 600VA/330W Battery Backup and Surge Protector | ![]() | Best Compact Pick for a Router and Light Computer Load | Capacity: 600VA/330W | Outlets: 7 total: 5 battery backup and surge-protected, 2 surge-only | Runtime: 23 minutes at 100W load | VIEW ON AMAZON | See Our Full Breakdown |
| CyberPower ST425 Standby UPS Battery Backup and Surge Protector | ![]() | Best Simple Backup for a Router-First Setup | Capacity: 425VA/260W | Outlets: 8 total: 4 battery backup and surge-protected, 4 surge-protected | Runtime: 1 minute | VIEW ON AMAZON | See Our Full Breakdown |
| APC BX1500M 1500VA/900W UPS Battery Backup and Surge Protector | ![]() | Best High-Capacity Value for Mixed Office Gear | Capacity: 1500VA/900W | Voltage: 120V | Outlets: 10 total: 5 battery backup and surge-protected, 5 surge-only | VIEW ON AMAZON | See Our Full Breakdown |
| GOLDENMATE 1000VA/800W Lithium UPS Battery Backup and Surge Protector | ![]() | Best for Long-Term Battery Life | Capacity: 1000VA / 800W | Battery type: Lithium iron phosphate | Battery life: Up to 10 years; over 5,000 charge cycles | VIEW ON AMAZON | See Our Full Breakdown |
| APC Back-UPS BE1050G3 1050VA/600W Battery Backup and Surge Protector | ![]() | Best for USB Charging and Voltage Regulation | Model: BE1050G3 | Capacity: 1050VA / 600W | Outlets: 8 total: 6 battery backup and surge protection, 2 surge-only | VIEW ON AMAZON | See Our Full Breakdown |
| APC Back-UPS BE650G1 650VA/390W Battery Backup and Surge Protector | ![]() | Best for Basic Router and Computer Protection | Capacity: 650VA / 390W | Outlets: 8 total: 4 battery backup and surge protection, 4 surge-only | Input voltage: 120V | VIEW ON AMAZON | See Our Full Breakdown |
| APC BE600M1 600VA/330W UPS Battery Backup and Surge Protector | ![]() | Best Compact Pick for a Router-First Setup | Capacity: 600VA / 330W | Outlets: 7 total: 5 battery backup and surge protection, 2 surge-only | USB port: 1.5A USB Type-A | VIEW ON AMAZON | See Our Full Breakdown |
| APC Back-UPS BE550G 550VA/330W Uninterruptible Power Supply | ![]() | Best for Wall-Mounted, Low-Load Setups | Capacity: 550VA / 330W | Input voltage: 120V | Output voltage: 120V AC | VIEW ON AMAZON | See Our Full Breakdown |
| SKE VL625 625VA/360W UPS Battery Backup and Surge Protector | ![]() | Best Compact Pick for a Router and Essentials | Capacity: 625 VA / 360 W | Outlets: 7 total: 5 battery backup and surge protected; 2 surge-only | Voltage: 120 V | VIEW ON AMAZON | See Our Full Breakdown |
| APC BE850G2 850VA/450W UPS Battery Backup and Surge Protector | ![]() | Best for a Balanced Home-Office Setup | Capacity: 850 VA / 450 W | Outlets: 9 total: 6 battery backup and surge protected; 3 surge-only | Runtime: Up to 35 minutes at a 100W load | VIEW ON AMAZON | See Our Full Breakdown |
| CyberPower CP1500AVRLCD3 1500VA/900W LCD UPS Battery Backup | ![]() | Best for Higher-Wattage Home Offices | Capacity: 1500 VA / 900 W | Topology: Line-interactive | Output waveform: Simulated sine wave | VIEW ON AMAZON | See Our Full Breakdown |
| CyberPower EC850LCD Ecologic UPS Battery Backup and Surge Protector | ![]() | Best for Cutting Peripheral Standby Power | Capacity: 850 VA / 510 W | Outlets: 12 total: 6 battery backup and surge protected; 6 surge-only | ECO outlets: 3 surge-only outlets with ECO control | VIEW ON AMAZON | See Our Full Breakdown |
| APC BE425M UPS Battery Backup and Surge Protector | ![]() | Best Simple Backup for Routers | Capacity: 425 VA / 255 W | Outlets: 6 total: 4 battery backup and surge protected; 2 surge-only | Runtime: Up to 15 minutes at a 100W load | VIEW ON AMAZON | See Our Full Breakdown |
| ups for home office computers and router | Capacity | Outlets | Warranty | Runtime |
|---|---|---|---|---|
| CyberPower CST135UC2-R Line-In | 1350VA/810W | 10 total: 5 battery backup and surge-protected, 5 surge-only | — | — |
| CyberPower CP1500PFCLCD PFC Si | 1500VA/1000W | 12 total: 6 battery backup and surge-protected, 6 surge-protected | 3 years, including battery coverage | — |
| APC Back-UPS BE600M1R 600VA/33 | 600VA/330W | 7 total: 5 battery backup and surge-protected, 2 surge-only | 1 year | 23 minutes at 100W load |
| CyberPower ST425 Standby UPS B | 425VA/260W | 8 total: 4 battery backup and surge-protected, 4 surge-protected | 3 years, including the battery | 1 minute |
| APC BX1500M 1500VA/900W UPS Ba | 1500VA/900W | 10 total: 5 battery backup and surge-protected, 5 surge-only | — | — |
| GOLDENMATE 1000VA/800W Lithium | 1000VA / 800W | 8 NEMA 5-15P | — | 30 minutes |
| APC Back-UPS BE1050G3 1050VA/6 | 1050VA / 600W | 8 total: 6 battery backup and surge protection, 2 surge-only | 3 years | Up to 36 minutes at 100W load |
| APC Back-UPS BE650G1 650VA/390 | 650VA / 390W | 8 total: 4 battery backup and surge protection, 4 surge-only | 3 years | — |
| APC BE600M1 600VA/330W UPS Bat | 600VA / 330W | 7 total: 5 battery backup and surge protection, 2 surge-only | — | 23 minutes at 100W load |
| APC Back-UPS BE550G 550VA/330W | 550VA / 330W | 8 total: 4 battery backup and surge protection, 4 surge-only | 3 years | Up to 30 minutes |
| SKE VL625 625VA/360W UPS Batte | 625 VA / 360 W | 7 total: 5 battery backup and surge protected; 2 surge-only | 1 year | — |
| APC BE850G2 850VA/450W UPS Bat | 850 VA / 450 W | 9 total: 6 battery backup and surge protected; 3 surge-only | 3 years | Up to 35 minutes at a 100W load |
| CyberPower CP1500AVRLCD3 1500V | 1500 VA / 900 W | 12 total: 6 battery backup and surge protected; 6 surge-protected | 3 years, including battery | Listed as 3 minutes |
| CyberPower EC850LCD Ecologic U | 850 VA / 510 W | 12 total: 6 battery backup and surge protected; 6 surge-only | 3 years, including battery | Listed as 2 minutes |
| APC BE425M UPS Battery Backup | 425 VA / 255 W | 6 total: 4 battery backup and surge protected; 2 surge-only | 3 years | Up to 15 minutes at a 100W load |
More Details on Our Top Picks
CyberPower CST135UC2-R Line-Interactive UPS Battery Backup
The CST135UC2-R pairs 1350VA/810W capacity with USB-C and USB-A charging, making it a flexible fit for a home office with a computer, router, and mobile devices. Its LCD reports power and battery status, while AVR can correct modest voltage swings without drawing on the battery. Compared with the CyberPower CP1500PFCLCD, it has less capacity and simulated rather than pure sine wave output, so the CP1500PFCLCD is the safer match for a computer with an active PFC power supply. This model still offers ten outlets, but only five are battery-backed; use those for the computer and router, not every peripheral. I’d choose it for useful charging and status features, but skip it if waveform compatibility or backup for more than five devices is a priority.
Pros:- 1350VA/810W capacity suits a computer-and-router setup
- AVR corrects minor voltage fluctuations without using battery power
- USB-C and USB-A ports add convenient device charging
- LCD displays power, battery, and fault information
Cons:- Simulated sine wave may be less suitable for some active-PFC power supplies
- Only five of the ten outlets provide battery backup
Best for: Home-office users who want USB-C and USB-A charging alongside battery backup for a computer and router.
Not ideal for: Owners of active-PFC computers who want sine-wave output, or offices that need battery backup at more than five outlets.
- Capacity:1350VA/810W
- Output waveform:Simulated sine wave
- Outlets:10 total: 5 battery backup and surge-protected, 5 surge-only
- USB ports:USB-C and USB-A
- Voltage:120V input and output
- Power cord:5 feet
- Form factor:Mini-tower
- Dimensions and weight:13.7 x 3.9 x 9.8 inches; 22.3 pounds
Our verdict“Choose the CST135UC2-R if USB-C charging and a clear status display matter more than pure sine-wave output or battery backup for every outlet.”
CyberPower CP1500PFCLCD PFC Sinewave UPS Battery Backup and Surge Protector
For a home office where computer compatibility comes first, the CP1500PFCLCD earns the strongest all-round position here. Its 1500VA/1000W capacity and sine-wave output make it a better fit for active-PFC power supplies than the simulated-sine CyberPower CST135UC2-R or APC BX1500M. AVR handles minor voltage changes without spending battery charge, and the tilting color LCD makes status easier to read when the unit sits below a desk. Twelve outlets give you room for a computer, router, and accessories, though only six are battery-backed, so prioritize the equipment that must stay on. It is also the heaviest option in this group and takes up real floor or desk space. I’d pick it over the smaller APC BE600M1R when the computer and connected gear need more capacity and waveform compatibility.
Pros:- Sine-wave output supports active-PFC and conventional power supplies
- 1500VA/1000W capacity provides more headroom than the smaller models in this group
- AVR corrects minor voltage changes without using battery power
- Tilting color LCD and USB-A/USB-C charging ports add useful convenience
Cons:- Only six of the twelve outlets provide battery backup
- At 24.9 pounds, it is cumbersome to move and takes substantial space
Best for: Home-office owners with an active-PFC desktop, router, and several accessories who want sine-wave backup and a readable display.
Not ideal for: Buyers with a compact desk setup, a light router-only load, or no need for sine-wave compatibility and higher capacity.
- Capacity:1500VA/1000W
- Topology:Line interactive
- Outlets:12 total: 6 battery backup and surge-protected, 6 surge-protected
- Output:Sine wave
- Voltage regulation:Automatic voltage regulation
- Display:Tilting color LCD, up to 22 degrees
- USB ports:1 Type-A and 1 Type-C
- Dimensions and weight:14 x 3.9 x 11 inches; 24.9 pounds
- Warranty:3 years, including battery coverage
Our verdict“Choose the CP1500PFCLCD for a larger home-office setup or an active-PFC computer that calls for sine-wave backup.”
APC Back-UPS BE600M1R 600VA/330W Battery Backup and Surge Protector
The APC BE600M1R makes sense when the goal is to keep a router, modem, or modest computer setup powered through a short interruption rather than support a demanding workstation. It supplies 600VA/330W and lists 23 minutes of runtime at a 100W load, a useful reference for lighter equipment—not a promise for every setup. Five battery-backed outlets cover essential devices, while two more protect against surges only. Compared with the CyberPower ST425, it offers more capacity and a replaceable battery, making it the more flexible choice for adding a small computer. It still falls well short of the 1500VA CyberPower CP1500PFCLCD for a high-draw desktop or multiple peripherals. The wall-mountable design helps in a crowded office, but the one-year warranty is shorter than the ST425’s three-year coverage.
Pros:- Compact enclosure can sit on the floor or mount on a wall
- Five battery-backed outlets support a small set of essential devices
- Replaceable lead-acid battery extends the unit’s service life
- Lists 23 minutes of runtime at a 100W load
Cons:- 330W capacity is limited for demanding desktop computers and multiple peripherals
- Replacement battery is sold separately
- One-year warranty is shorter than the CyberPower ST425’s three-year warranty
Best for: Remote workers who need a compact UPS for a router, modem, and low-power computer, with the option to replace the battery.
Not ideal for: Users running a high-draw desktop or several monitors, or buyers who need long backup runtime at heavier loads.
- Capacity:600VA/330W
- Outlets:7 total: 5 battery backup and surge-protected, 2 surge-only
- Runtime:23 minutes at 100W load
- USB output:1.5A
- Input and output voltage:120V input; 120V AC output
- Battery type:Lead acid
- Mounting:Floor- or wall-mountable
- Warranty:1 year
Our verdict“Pick the BE600M1R for a compact router-and-light-computer setup, but move up to a higher-capacity unit for a full desktop workstation.”
CyberPower ST425 Standby UPS Battery Backup and Surge Protector
The CyberPower ST425 is the most basic fit in this group: a compact standby UPS for keeping a router or other low-power essential from dropping out during a brief interruption. Its eight outlets are useful for a crowded plug arrangement, but only four provide battery backup, and its 425VA/260W capacity leaves little room for a demanding computer setup. The listed one-minute runtime is a clear signal to treat this as a short-bridge option, not a way to keep working through a long outage. Compared with the APC BE600M1R, it has less capacity and no listed USB charging port, but its three-year warranty includes the battery. Transformer-spaced outlets can also make bulky adapters easier to fit. I’d favor the BE600M1R for a small computer and router; the ST425 is better suited to a router-first setup with modest power needs.
Pros:- Eight outlets provide room for several plugs and adapters
- Four outlets have battery backup and surge protection
- Transformer-spaced outlets accommodate some bulky adapters
- Three-year warranty includes the battery
Cons:- 425VA/260W capacity is restrictive for desktop computers and multiple peripherals
- Listed runtime is only one minute
- Simulated sine-wave output may not suit every computer power supply
Best for: People who mainly want brief backup for a router or other low-power network equipment and value a simple, compact unit.
Not ideal for: Home-office users who need sustained computer runtime, more than four battery-backed devices, or sine-wave output.
- Capacity:425VA/260W
- Outlets:8 total: 4 battery backup and surge-protected, 4 surge-protected
- Runtime:1 minute
- Input:120V
- Battery type:Lead acid
- Battery charge time:76 minutes
- Power cord:5 feet
- Warranty:3 years, including the battery
- Connected equipment guarantee:USD 75,000
Our verdict“Choose the ST425 for a compact, short-duration router backup, not for keeping a full home-office computer running.”
APC BX1500M 1500VA/900W UPS Battery Backup and Surge Protector
The APC BX1500M brings 1500VA/900W capacity, AVR, and an LCD status panel to a home office with a desktop, router, and several accessories. That extra capacity makes it a more suitable match than the APC BE600M1R for a larger setup, while the display helps track load and battery status at a glance. Its stepped-approximation sine-wave output is the key compromise: unlike the sine-wave CyberPower CP1500PFCLCD, it may be a less suitable choice for some active-PFC computers. Five of its ten outlets are battery-backed, so keep the computer and network equipment on those and use surge-only outlets for less critical gear. The battery can be replaced, but the replacement is sold separately, and actual runtime depends on connected load. This is a practical capacity-focused option if sine-wave output is not a requirement.
Pros:- 1500VA/900W capacity suits a larger office setup than the compact APC BE600M1R
- AVR corrects low and high input voltage
- LCD shows status, load, and battery information
- Replaceable battery supports longer-term maintenance
Cons:- Stepped-approximation sine-wave output may be less suitable for some active-PFC power supplies
- Only five of the ten outlets provide battery backup
- Replacement battery is sold separately, and runtime varies with load
Best for: Home-office users with a desktop, router, and multiple accessories who want high capacity, AVR, and an LCD without needing sine-wave output.
Not ideal for: Owners of active-PFC computers seeking sine-wave output, or buyers who expect long runtime at a heavy connected load.
- Capacity:1500VA/900W
- Voltage:120V
- Outlets:10 total: 5 battery backup and surge-protected, 5 surge-only
- Output waveform:Stepped approximation to a sine wave
- Automatic voltage regulation:Corrects low and high input voltage
- Display:LCD status panel
- Efficiency:92%+
- Battery:Replaceable; APC APCRBC124 sold separately
Our verdict“Choose the BX1500M for a higher-capacity home office if its stepped-approximation output fits your computer and you can accept load-dependent runtime.”
GOLDENMATE 1000VA/800W Lithium UPS Battery Backup and Surge Protector
The GOLDENMATE 1000VA/800W is the strongest fit here for buyers who want a UPS built around battery longevity rather than simple replacement convenience. Its LiFePO4 battery is rated for over 5,000 charge cycles and up to 10 years, a different ownership proposition from the lead-acid batteries in the APC BE1050G3 and smaller APC models. Eight backed-up outlets and 800W capacity give a home-office computer, router, and peripherals more headroom than the 330W APC BE600M1. The LCD shows operating conditions, while the buzzer can be muted. The tradeoff is a cooling fan that may be audible during heavy battery use, plus a stated 10-hour recharge time. Its 30-minute runtime figure should not be treated as a guarantee for every setup; actual backup time depends on load.
Pros:- LiFePO4 battery rated for over 5,000 charge cycles and up to 10 years
- 800W capacity offers more load headroom than the 330W APC BE600M1
- Eight NEMA outlets provide backup and surge protection
- LCD status display and a mute option for the buzzer
Cons:- Cooling fan can be audible during heavy battery use
- Listed battery recharge time is 10 hours
- Designed for standard 110V household power, so outlet voltage should be checked
Best for: Home-office owners who want higher wattage capacity and a long-cycle-life battery for a computer and router setup.
Not ideal for: People who need a silent UPS beside their desk or want a quick recharge after an outage; the fan can make noise and the listed recharge time is 10 hours.
- Capacity:1000VA / 800W
- Battery type:Lithium iron phosphate
- Battery life:Up to 10 years; over 5,000 charge cycles
- Outlets:8 NEMA 5-15P
- Input voltage:90–140V AC
- Output voltage:120V
- Battery charge time:10 hours
- Runtime:30 minutes
- Form factor:Tower
Our verdict“Choose the GOLDENMATE if long battery life and 800W capacity matter more than quiet operation or a shorter recharge time.”
APC Back-UPS BE1050G3 1050VA/600W Battery Backup and Surge Protector
The APC Back-UPS BE1050G3 balances everyday computer backup with useful extras for a busy desk. Its automatic voltage regulation helps manage voltage fluctuations without relying on battery backup for every variation, while USB-A and USB-C ports can charge personal devices. Six of its eight outlets provide battery backup, leaving two for surge-only accessories. Compared with the GOLDENMATE 1000VA/800W, this APC has less wattage capacity, but it adds direct USB charging and a user-replaceable lead-acid battery. The APC BE650G1 is a lower-capacity alternative, though it lacks the listed USB-C port and has only four backed-up outlets. The BE1050G3’s replacement battery is sold separately, and its runtime varies with load, so it suits practical shutdown protection better than a fixed runtime promise.
Pros:- Six battery-backed outlets among eight total
- USB-C and USB-A charging ports provide 5V/3A shared output
- Automatic voltage regulation helps manage voltage fluctuations
- User-replaceable battery
Cons:- Replacement battery is sold separately
- 600W capacity is lower than the GOLDENMATE 1000VA/800W
- Runtime depends on the connected load
Best for: Remote workers who want battery backup for a computer and router, voltage regulation, and USB-A/USB-C charging at the desk.
Not ideal for: Buyers seeking the highest wattage capacity or a long-life lithium battery; the GOLDENMATE offers 800W and a LiFePO4 battery.
- Model:BE1050G3
- Capacity:1050VA / 600W
- Outlets:8 total: 6 battery backup and surge protection, 2 surge-only
- USB ports:1 USB-C and 1 USB-A; 5V/3A shared
- Input voltage:120V
- Battery type:Lead acid
- Runtime:Up to 36 minutes at 100W load
- Battery replacement:APCRBC164, sold separately
- Warranty:3 years
Our verdict“Pick the BE1050G3 for a feature-rich desk setup with voltage regulation and USB charging, rather than maximum wattage or long-life battery chemistry.”
APC Back-UPS BE650G1 650VA/390W Battery Backup and Surge Protector
The APC Back-UPS BE650G1 is a straightforward choice when a home office needs protection for a modest computer-and-router load, not a large collection of powered equipment. It supplies 390W and splits its eight outlets evenly: four have battery backup, while four are surge-only. That makes outlet planning more important than on the APC BE1050G3, which backs up six outlets and offers more capacity. For a router and computer, the BE650G1 adds data-line surge protection, LED status indicators, and audible alerts. Its compact dimensions can suit a crowded setup, but the four backed-up outlets may be limiting if several devices need outage protection. The lead-acid battery is user-replaceable, though sold separately, and the listed runtime of up to 22 minutes applies at a 100W load.
Pros:- Eight outlets split between four backed-up and four surge-only
- Data-line surge protection adds coverage for connected data lines
- LED indicators and audible alerts show UPS status
- User-replaceable battery
Cons:- Only four outlets provide battery backup
- 390W capacity limits use with higher-power computer setups
- Replacement battery is sold separately
Best for: Home-office users protecting a modest computer, router, and network connection who can keep backed-up devices to four outlets.
Not ideal for: People with several devices that all need battery backup or a higher-power workstation; the BE1050G3 offers greater capacity and six backed-up outlets.
- Capacity:650VA / 390W
- Outlets:8 total: 4 battery backup and surge protection, 4 surge-only
- Input voltage:120V
- Output voltage:120V
- Battery runtime:Up to 22 minutes at 100W load
- Battery average life:3 years
- Dimensions:11.89 × 7.09 × 3.46 inches
- Weight:13.6 pounds
- Warranty:3 years
Our verdict“Choose the BE650G1 for basic computer-and-router protection when four backed-up outlets and 390W are enough.”
APC BE600M1 600VA/330W UPS Battery Backup and Surge Protector
With a 600VA/330W rating and five battery-backed outlets, the APC BE600M1 suits a router-first home office where a computer needs time to save work and shut down rather than run through a long outage. It also has two surge-only outlets and a USB-A charging port, including during outages according to the product description. Compared with the APC BE650G1, it offers one more backed-up outlet but lower wattage capacity; compared with the APC BE1050G3, it is a smaller-capacity, simpler option without USB-C or listed automatic voltage regulation. The 23-minute runtime figure is specified at a 100W load, so a computer drawing more power will shorten backup time. Its battery is replaceable, but the replacement is sold separately.
Pros:- Five battery-backed outlets plus two surge-only outlets
- USB-A charging port is available during outages
- User-replaceable battery
- Compact 10.79 × 4.13 × 5.47-inch footprint
Cons:- 330W capacity restricts the load it can support
- Runtime varies with the connected load
- Replacement battery is sold separately
Best for: People with a router, modem, and low-to-moderate-power home-office computer who want five backed-up outlets in a compact UPS.
Not ideal for: Users running a power-hungry desktop or several high-draw devices; the 330W capacity is lower than the BE650G1 and BE1050G3.
- Capacity:600VA / 330W
- Outlets:7 total: 5 battery backup and surge protection, 2 surge-only
- USB port:1.5A USB Type-A
- Runtime:23 minutes at 100W load
- Battery charge time:10 hours
- Input and output voltage:120V
- Power cord length:5 feet
- Dimensions:10.79 × 4.13 × 5.47 inches
- Compatible replacement battery:APCRBC154
Our verdict“Choose the BE600M1 for a compact router-and-computer setup that benefits from five backed-up outlets but does not need more than 330W.”
APC Back-UPS BE550G 550VA/330W Uninterruptible Power Supply
The APC Back-UPS BE550G makes sense when mounting flexibility matters more than outlet count on battery. It has eight outlets, but only four provide battery backup; the other four offer surge protection only. At 330W, it shares the APC BE600M1’s capacity while giving up one battery-backed outlet, so the BE600M1 is the more useful choice when several devices need outage coverage. The BE550G instead brings status indicators, audible alarms, data-line protection, and a design that can be floor- or wall-mounted. Those features suit a small networking corner or a tidy desk arrangement, though its 13-pound weight and listed dimensions mean it is not a featherweight wall accessory. The battery is user-replaceable, but replacement is sold separately, and the 30-minute runtime figure depends on load.
Pros:- Eight outlets, including four with battery backup
- Can be placed on the floor or wall-mounted
- Data-line protection, status indicators, and audible alarms
- User-replaceable battery
Cons:- Only four outlets provide battery backup
- 330W capacity is suited to low-load setups
- Replacement battery is sold separately
Best for: Home-office users with a low-power computer and router who want a floor- or wall-mountable UPS and can limit backup to four devices.
Not ideal for: Buyers needing five or more battery-backed outlets or higher wattage; the BE600M1 has five backed-up outlets at the same 330W capacity.
- Capacity:550VA / 330W
- Input voltage:120V
- Output voltage:120V AC
- Outlets:8 total: 4 battery backup and surge protection, 4 surge-only
- Runtime:Up to 30 minutes
- Battery average life:3 years
- Dimensions:12 × 3.3 × 7 inches
- Weight:13 pounds
- Warranty:3 years
Our verdict“Pick the BE550G when mounting options and basic protection matter more than having as many battery-backed outlets as the BE600M1.”
SKE VL625 625VA/360W UPS Battery Backup and Surge Protector
The SKE VL625 suits a home office that needs backup for a router, modem, and a few low-power devices without giving a UPS much desk space. Its compact tower measures just 3 inches wide, while five battery-backed outlets leave two more for surge protection only. AVR can correct some voltage fluctuations without switching to battery, and the replaceable battery gives the unit a maintenance path beyond its initial battery life. Compared with the APC BE425M, the SKE offers more outlets, USB and Type-C charging, and greater stated capacity; the APC is the simpler choice for a very small router-only setup. The tradeoffs are its simulated sine wave output and 360W ceiling, which limit its fit for demanding computer loads. Check the listed output-voltage specification against your equipment before buying.
Pros:- Compact 3-inch-wide tower fits narrow spaces.
- Five outlets provide battery backup, with two additional surge-only outlets.
- AVR helps handle some voltage fluctuations without using battery power.
- User-replaceable battery and USB/Type-C charging ports.
Cons:- 360W maximum output is a limiting factor for higher-power computer setups.
- Simulated sine wave output may not suit every computer power supply.
- The listed 230V AC output specification warrants checking against connected equipment.
Best for: Home-office users who want a compact UPS for a router, modem, and several low-power devices, plus USB charging.
Not ideal for: People backing up a high-draw desktop or equipment that requires pure sine wave output; its 360W limit and simulated waveform are constraints.
- Capacity:625 VA / 360 W
- Outlets:7 total: 5 battery backup and surge protected; 2 surge-only
- Voltage:120 V
- Ports:USB, Type-C, RJ45
- Battery:Sealed lead-acid; user-replaceable
- Form factor:Compact tower
- Dimensions and weight:11.7 × 3 × 6.7 in; 9 lb
- Warranty:1 year
Our verdict“Choose the SKE VL625 for compact backup across a router, modem, and small office accessories, but not for a power-hungry desktop.”
APC BE850G2 850VA/450W UPS Battery Backup and Surge Protector
The APC BE850G2 balances outlet count, capacity, and useful status feedback for a mixed setup of computer, router, and networking gear. Six of its nine outlets provide battery backup, and the listed runtime reaches up to 35 minutes at a 100W load—a reference point for modest loads, not a guarantee for a desktop-heavy setup. Its LED display, audible alarms, and wiring-fault indicator make power conditions easier to spot than on the simpler APC BE425M. The replaceable battery also helps extend the unit’s useful life, though the compatible RBC17 battery is sold separately. Two USB-A ports add charging convenience, but they share 5V/2.4A output. This is a more capable middle ground than the SKE VL625, but it has less headroom than the 900W CyberPower CP1500AVRLCD3.
Pros:- Six battery-backed outlets among nine total.
- Up to 35 minutes of stated runtime at a 100W load.
- LED status display, audible alarms, and wiring-fault indicator.
- User-replaceable battery and two USB-A charging ports.
Cons:- Replacement battery is sold separately.
- Only six outlets provide battery backup.
- Shared USB-A output limits charging when both ports are in use.
Best for: Home-office users with a modest computer, router, and networking accessories who want clear status alerts and a replaceable battery.
Not ideal for: Users with a high-draw workstation or many devices that all need backup; only six outlets are battery-backed, and the unit is rated at 450W.
- Capacity:850 VA / 450 W
- Outlets:9 total: 6 battery backup and surge protected; 3 surge-only
- Runtime:Up to 35 minutes at a 100W load
- USB:2 USB-A ports; 5V/2.4A shared
- Battery:User-replaceable; compatible RBC17 battery sold separately
- Battery charge time:8 hours
- Dimensions and weight:12.87 × 4.13 × 5.47 in; 9.6 lb
- Warranty:3 years
Our verdict“Pick the BE850G2 for a moderate home-office load that benefits from status monitoring and replaceable-battery support.”
CyberPower CP1500AVRLCD3 1500VA/900W LCD UPS Battery Backup
When a home-office computer draws more power or shares backup with several network devices, the CyberPower CP1500AVRLCD3 offers the strongest stated capacity in this group at 900W. Its 12 outlets give a setup room to grow, though only six are battery-backed; the other six protect against surges without keeping devices running in an outage. Automatic voltage regulation can handle minor fluctuations without draining the battery, and the color LCD exposes battery and power conditions rather than leaving users to infer them from alarms. Compared with the 450W APC BE850G2, this CyberPower has substantially more output headroom and more total outlets. Its simulated sine wave output remains a caveat for sensitive equipment, and the listed runtime of three minutes points to a short window for saving work and shutting down—not extended operation.
Pros:- 900W capacity offers more headroom than the 450W APC BE850G2.
- Twelve outlets accommodate a larger mix of office and network devices.
- LCD shows battery and power conditions.
- AVR corrects minor power fluctuations without switching to battery.
Cons:- Only six of the twelve outlets provide battery backup.
- Listed runtime is just 3 minutes.
- Simulated sine wave output may not suit every connected device.
Best for: People with a higher-wattage home-office computer and router who need more capacity and a display for power-status checks.
Not ideal for: Anyone seeking long outage runtime or equipment that calls for pure sine wave output; its stated runtime is three minutes and its waveform is simulated.
- Capacity:1500 VA / 900 W
- Topology:Line-interactive
- Output waveform:Simulated sine wave
- Outlets:12 total: 6 battery backup and surge protected; 6 surge-protected
- USB:1 Type-A and 1 Type-C
- Automatic voltage regulation:Yes
- Runtime:Listed as 3 minutes
- Warranty:3 years, including battery
Our verdict“Choose this model for higher-wattage computer setups that need a brief shutdown window and more capacity than the APC BE850G2.”
CyberPower EC850LCD Ecologic UPS Battery Backup and Surge Protector
The CyberPower EC850LCD has a specific advantage for a desk where peripherals draw power even when the computer is asleep or off: its ECO-controlled outlets can shut off connected devices in those states. That can make this 850VA unit a better match than the APC BE850G2 for someone who wants to manage peripheral power, though both offer six battery-backed outlets and a status display. The EC850LCD adds 12 total outlets, with three surge-only outlets under ECO control, so users can separate essential backup devices from accessories. Its 510W capacity is suited to moderate loads, not a heavy workstation, and the listed runtime is just two minutes. That makes it a shutdown-buffer UPS rather than a way to keep a home office running through a longer outage. Simulated sine wave output is another compatibility point to check.
Pros:- ECO-controlled outlets can switch off selected peripherals when a computer is off or asleep.
- Twelve outlets provide room to connect a full desk setup.
- LCD panel displays battery and power conditions.
- Three-year warranty includes the battery.
Cons:- Listed runtime is only 2 minutes.
- Only six of the twelve outlets provide battery backup.
- Simulated sine wave output may not suit every computer or peripheral.
Best for: Home-office users who want to shut off selected peripherals automatically when their computer is off or asleep.
Not ideal for: People who need a desktop and router to stay online through extended outages, or who need more than 510W of capacity.
- Capacity:850 VA / 510 W
- Outlets:12 total: 6 battery backup and surge protected; 6 surge-only
- ECO outlets:3 surge-only outlets with ECO control
- Maximum power:500 W
- Runtime:Listed as 2 minutes
- Battery:Sealed lead acid; average life listed as 3 years
- Power cord:5 ft
- Warranty:3 years, including battery
Our verdict“Choose the EC850LCD if automatic peripheral shutoff matters more than extended runtime or high output capacity.”
APC BE425M UPS Battery Backup and Surge Protector
The APC BE425M is the leanest choice here for keeping a router or modem online long enough to ride out a brief interruption or handle an orderly shutdown. Four battery-backed outlets are enough for a small network setup, while two surge-only outlets can take accessories that do not need to stay powered. Its wall-mountable design is a practical advantage in a crowded office, and audible alarms plus a wiring-fault indicator provide basic status cues. Compared with the SKE VL625, it has fewer outlets and lower capacity, but its stated 120V output matches typical US home-office equipment specifications more directly. The 15-minute runtime is specified at a 100W load, so users should not expect that duration with a heavier computer. This is a focused low-power option, not a desktop-workstation backup.
Pros:- Compact design can be wall-mounted.
- Four battery-backed outlets suit a small router and modem setup.
- Two additional surge-only outlets separate nonessential accessories.
- Audible alarms and a building-wiring fault indicator offer basic status alerts.
Cons:- 255W capacity limits use with higher-draw computers.
- Up to 15 minutes of runtime applies at a 100W load.
- Only four of the six outlets provide battery backup.
Best for: Remote workers who mainly need battery backup for a router, modem, and one or two low-power essentials, especially where wall mounting helps.
Not ideal for: Buyers backing up a desktop computer and several peripherals; its 255W limit and four battery-backed outlets leave less capacity and room than the APC BE850G2.
- Capacity:425 VA / 255 W
- Outlets:6 total: 4 battery backup and surge protected; 2 surge-only
- Runtime:Up to 15 minutes at a 100W load
- Input voltage:120 V
- Output voltage:120 V
- Battery charge time:8 hours
- Dimensions and weight:4.13 × 9.98 × 5.52 in; 5.7 lb
- Warranty:3 years
Our verdict“Choose the BE425M for a compact, low-power router-and-modem setup, not as the main backup for a demanding computer.”

How We Picked
I ranked these UPS units around the needs of a home office: keeping a computer and network connection running long enough to save work, shut down safely, or ride out a brief outage. I weighed stated watt capacity and VA capacity, output type where specified, line-interactive or standby design, monitoring features, and the practical fit for a computer-and-router load. I also considered whether the unit’s role is better suited to a single router, a modest workstation, or a higher-draw desk setup.
The order favors models that pair useful capacity with features relevant to computer protection, then places simpler, smaller, or more specialized units according to their best-fit buyer. A larger VA number alone did not determine ranking: watt capacity, output characteristics, and how much equipment the buyer needs to support matter too. Runtime varies with load and battery condition, so I treat capacity as a comparison point rather than a promise of a particular number of minutes.
Factors to Consider When Choosing Ups For Home Office Computers And Routers
My reviews compare the individual models; these broader checks help you match a UPS to the way your office actually uses power. Before choosing, map the devices you need to keep on, how you want the computer to shut down, and what kind of outage you are preparing for.
Add Up Watts, Not Just VA
UPS labels often show both VA and watts, but the watt limit determines how much real equipment the unit can support. Check the watt draw printed on device labels or shown in their specifications, then total the equipment you want backed up at once. A desktop computer and monitor can draw far more than a router, so a unit sized only for networking may not support the full desk. Leave headroom for changing loads rather than choosing a model that sits at its rated limit. Avoid treating a large VA figure as a guarantee of long runtime; it describes capacity, not a fixed number of minutes. If your load is uncertain, measure it with a suitable plug-in power meter before buying.
Decide Which Devices Need Battery Backup
During an outage, every device connected to a battery-backed outlet uses some of the available reserve. A desktop, monitor, router, modem, and external storage may all matter, but speakers, chargers, and lamps may not need battery support. Separate the devices needed to save work or stay online from accessories that can go dark. Check the outlet layout carefully: some UPS models provide surge protection on outlets that do not have battery backup. Plugging low-priority equipment into battery outlets can shorten the time available for the computer and router. Keep critical network gear together when you want the internet connection to remain active during a brief outage.
Match Output and UPS Design to Your Computer
Some computer power supplies with active power-factor correction can be more sensitive to the waveform produced by a UPS while running on battery. A pure sine wave model is a safer fit when your computer manufacturer recommends it or when you want to reduce the chance of a power-supply compatibility issue. Line-interactive units can respond to voltage changes without switching to battery for every fluctuation, while standby models tend to focus on basic backup and surge protection. These design differences do not replace checking the power supply’s requirements. A router-only setup usually has less demanding output needs than a desktop workstation. Choose based on the equipment you will connect, rather than assuming every UPS works the same way.
Plan for Runtime and a Safe Shutdown
Most home-office UPS units are intended to bridge short interruptions and give you time to save files, not to run a full workstation indefinitely. Runtime drops as more devices draw power, and batteries lose capacity as they age. If you want automatic shutdown, check that the UPS offers a compatible data connection and software for your computer’s operating system. Without that setup, you may need to respond to an alarm and shut down manually. Router backup has a different goal: preserving connectivity for a short period may matter more than keeping a monitor powered. Compare runtime estimates at a load close to yours, not only the unit’s maximum rating.
Check Battery Replacement, Size, and Outlets
A UPS is a battery-powered device that will eventually need battery service or replacement, so check the manufacturer’s guidance before buying. Lithium models can differ from traditional lead-acid designs in service life, weight, and maintenance expectations, but confirm the exact replacement policy and warranty rather than relying on battery type alone. Measure the space around your desk and leave room for ventilation and access to outlets. Look at outlet spacing too; bulky adapters can block neighboring sockets. A compact model may fit a router shelf more easily, while a larger unit may better suit a workstation but take more desk or floor space. Confirm the number of battery-backed outlets, not just the total outlet count.
Pay for Features You Will Actually Use
An LCD can make load and battery information easier to check, while USB connectivity and shutdown software can help protect an unattended computer. Those features add little value if you only want to keep a router alive through brief interruptions and are comfortable managing the setup manually. Surge protection remains useful, but it is not a substitute for battery backup on the outlets that matter. For a basic home office, prioritize adequate watt capacity and the correct outlet mix before adding display or monitoring features. If you use a high-draw computer or need clearer status information, paying for a larger monitored unit may make more sense. Avoid buying extra capacity without checking whether your actual equipment benefits from it.
Frequently Asked Questions
Can one UPS keep both my desktop computer and router running?
Yes, if the UPS has enough watt capacity for the computer, monitor, router, and any other equipment you connect to its battery-backed outlets. Add the devices’ power draw before choosing; a router uses much less power than most desktop systems, but the computer can consume most of the unit’s available capacity. If staying online matters, include the modem as well as the router. Keep nonessential accessories off the battery outlets to preserve runtime for the devices you need. Check the outlet layout so each critical device receives battery backup rather than surge protection alone.
Is a 1500VA UPS automatically better for my home office?
No. A 1500VA unit can support a higher load than many smaller models, but the watt rating, outlet arrangement, and output type still matter. If you only need backup for a router and a modest computer setup, a larger unit may take up more space and provide capacity you do not use. If your workstation includes a desktop and monitor, extra capacity can provide more flexibility as loads change. Compare the watt limits and runtime estimates at your expected load instead of choosing by VA alone. The CP1500 models in this roundup are aimed at heavier setups than the compact router-focused choices.
Should I choose a pure sine wave UPS for a desktop computer?
It can be a sensible choice when your computer’s power supply calls for a pure sine wave source or when you want to minimize compatibility concerns during battery operation. Not every desktop requires one, so check the power-supply documentation before paying for that feature. The CyberPower CP1500PFCLCD is the standout pure sine wave option in this group. A router or low-draw office setup may not need the same output characteristics as a demanding desktop. Capacity and runtime still matter, even when the waveform is a good match.
Can I use a UPS just for my router and modem?
Yes, and a smaller-capacity model may be a better fit than a large workstation UPS if networking equipment is all you need to support. Check the power requirements for both the modem and router, then confirm that the UPS has enough battery-backed outlets for them. Your internet service may still go down if equipment elsewhere in the provider’s network loses power, so local backup cannot guarantee uninterrupted internet. Keep other devices off the battery outlets to preserve power for networking. If you also want to support a computer, size the unit for the combined load instead.
How often should I replace a UPS battery, and what should I check first?
Follow the manufacturer’s maintenance guidance, since battery life depends on the model, use, environment, and charge conditions. A runtime that has fallen noticeably or a battery warning can signal that service is needed, but check the manual for the unit’s alert meanings. Before replacing a battery, confirm that the model supports user replacement and that a compatible replacement is available. A UPS may also need replacement if the unit itself is damaged or no longer operates correctly. Keep the unit in a suitable location and avoid blocking its ventilation, which supports reliable operation.
Conclusion
For most buyers pairing a desktop with network gear, my best overall choice is the CyberPower CP1500PFCLCD, which combines high capacity with pure sine wave output. The APC BX1500M is a strong alternative for shoppers prioritizing a 1500VA/900W class unit, while the CyberPower CP1500AVRLCD3 also suits higher-load setups that benefit from an LCD. For a more modest setup, the APC BE600M1 is my best value-style fit for a router and a limited number of essential devices, while the CyberPower ST425 offers a simpler starting point for buyers new to UPS equipment. Choose the GOLDENMATE 1000VA lithium UPS if lithium battery design is a specific priority, and look to the smaller APC BE425M or BE550G when compactness matters more than supporting a full desktop workstation. Before deciding, match the UPS’s watt limit and battery-backed outlets to your actual equipment.















